Filter By:
- Rigid (68)
- Suspension (74)
- Show More Brands
- Show Fewer Brands
Forks
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
FEATURES
- 7075-T6 Aluminum Standard 1” Steerer Tube to Accommodate Mid-Sized Racers
- Designed for 10mm Axle Conventional Hubs
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
IMPORTANT NOTES
- Includes Box One™ Stem Lock
- Note: Use of a star nut voids the warranty for this product.
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- 1-1/8 Inch 7000 Series Aluminum Steerer Tube
- Standard Size Fork for Larger-Sized Racers
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bonded Dropouts
COMPATIBILITY
- Box Two 1.1/8" Integrated Headset
- Box One Carbon 45x45 1.1/8" Integrated Headset
- Box Two Threadless Headset
- Box Two Headset Spacers
- Box One Front Load Stem
- Box One Top Load Stem
- Box Two Front Load Stem
- Box Two Top Load Stem
- Box One Delta Stem
- Box One Center Clamp Stem
- Box Two Center Clamp Stem
SPECIFICATIONS
- 20 Inch 24 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1-1/8 Inch
- Weight
- 20": 560g / 19.75oz
- 24": 585g / 20.7oz
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
FEATURES
- Overall Reduced Size for Smaller Racers
- 1 Inch 7000 Series Aluminum Steerer Tube
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bolded Dropouts
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
SPECIFICATIONS
- 20 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1 Inch
- Weight 397g/14.0oz
$349.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard.
FEATURES
- Oversized Technology™
- Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$379.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say goodbye to deflection.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- Oversized Technology™
- Tapered Steerer Tube to Reduce Deflection
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$149.99
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch
$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness.
- D-Loc 15mm bolt-on thru-axle
$299.00
The most iconic fork in the Columbus carbon range: clean, elegant lines, the Minimal is a monocoque carbon fork designed for frames with traditional steerers and satisfies a variety of rakes and steerer diameters.
The Minimal fork, in fact, is available both in a standard 1-1/8” diameter as well as in a 1” version, as well as the option of a traditional 45mm or 50 mm rake. Whether it’s a lugged or TIG welded frame, a standard geometry, or a frame designed for a small-statured rider, the Minimal fork offers a wide range of options, providing frame builders and riders with the best structural solutions and performance possible.
A Timeless model, the Minimal is adopted by classic traditional frame builders using standard tubing, as well as modern constructions using shaped and oriented tubes.
- T700S monocoque carbon fiber
- 300mm straight 1 or 1-1/8 carbon steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 45mm rake
- 340g
$299.00
The most iconic fork in the Columbus carbon range: clean, elegant lines, the Minimal is a monocoque carbon fork designed for frames with traditional steerers and satisfies a variety of rakes and steerer diameters.
The Minimal fork, in fact, is available both in a standard 1-1/8” diameter as well as in a 1” version, as well as the option of a traditional 45mm or 50 mm rake. Whether it’s a lugged or TIG welded frame, a standard geometry, or a frame designed for a small-statured rider, the Minimal fork offers a wide range of options, providing frame builders and riders with the best structural solutions and performance possible.
A Timeless model, the Minimal is adopted by classic traditional frame builders using standard tubing, as well as modern constructions using shaped and oriented tubes.
- T700S monocoque carbon fiber
- 300mm straight 1 or 1-1/8 carbon steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 45mm rake
- 340g
$319.99
Omnium, scratch, pursuit, points, time-trial: from the inspiring Vigorelli Velodrome of Milan, the temple of international cycling and historical birthplace of the Columbus brand, the Pista Leggera is a fork that encompasses both the spiritual & performance attitudes that rode this famed track.
An oversized, heat-treated, CNC-machined aluminum head provides stability and precision and is seamlessly integrated with aerodynamic, high-modulus carbon-fiber blades. The Pista Leggera has a classic 35mm rake, providing enhanced responsiveness even in narrow and fast trajectories. Pista Leggera is the pinnacle of research and development at the Columbus Carbon Lab and is adopted by many professionals for their track frames. The Pista Leggera is also available in a caliper brake version, providing you with the possibility of mounting a brake during training sessions on public routes.
- T700 monocoque carbon fiber blades
- 300mm tapered aluminum steerer
- Clearance for up to 25c tires
- 9x100mm aluminum dropouts
- 35mm rake
- 560g
$499.00
- T700S monocoque carbon fiber
- 300mm tapered carbon steerer
- Clearance for up to 28c tires
- 12x100mm carbon fiber dropouts with aluminum inserts
- 45mm rake
- 440g
$549.00
A new chapter in Columbus history!
For the first time, to celebrate our Centennial, we wanted to give an exceptional travel companion. Whether it’s dirt roads, trails, or ultra-marathons, Futura Adventure is the answer for the most ambitious explorers.
With MTB DNA, this fork can be equipped both on the most advanced tailor-made titanium, aluminum, or steel travel frames, as well as on frames with hard-tail MTB geometries. The innovations are remarkable: a Multi-Rake system, internal dynamo cable guides, bike-packing eyelets, and a 15mm Boost thru-axle. The remarkable load capacity takes further advantage of the adaptable rake, allowing you to finely balance reactivity and handling based on terrain and luggage. The 110mm spacing ensures maximum compatibility with MTB groups and wheels and increases stability in action. Furthermore, the predisposition for dynamo hubs guarantees the most extreme adventurers the possibility to recharge their devices at any time during the journey, without ever stopping to search for a power source.
In short, Futura Adventure is the newest fork in our collection, but it can’t wait to get back out there already!
- Full carbon monocoque with multi-rake system 45 or 50mm
- 15x110mm Boost axle spacing clearance for up to 29x3 tires
- Anything cage mount eyelets
- Internal dynamo cable guides
- 300mm steerer length
$599.00
On-Road, Off-Road, All-Roads!
Futura Gravel is the newest solution to the growing hybridization of road race and outdoor worlds, merging urban with nature, for all those cyclists in search of an all-round fork strongly declinable in contexts and uses.
From white roads to single tracks, from unpaved paths to city-scapes, Futura Gravel allows a very wide range of possible uses, thanks to its specific geometries and features. Oversized clearances and spaces, grant compatibility with knobby tires up to 40mm, able to face the most demanding off-road conditions. If used in wet conditions, adventurers and commuters can benefit from Futura’s capability to host fenders, thanks to its integrated hidden eyelets, maintaining enough clearance to roll up to 35mm tires even while using mudguards.
Whether on-road or off-road, dry or wet, disc brake guarantees performance and reliability: designed around the latest flat-mount & thru-axle standards, Futura Gravel grants the possibility to host up to 160mm rotors, for a very powerful braking experience. The tapered 1-1/4” steerer optimizes riding stability, matching the benefits of oversized lightweight sections to the capability to absorb and map even the most impervious trails, while, in terms of aesthetics, matches perfectly both the carbon-fiber as well as steel, alu, and titanium frames, with standard or oversized tubes and dimensions.
Finally, the 380mm axle-to-crown fork height, ensures a lower center of gravity, enhancing stability and proportions on a wider range of frame sizes and geometries.
- T700S monocoque carbon fiber
- 300mm tapered carbon steerer
- Clearance for up to 40c tires or 35c with fenders installed
- 12x100mm thru-axle carbon fiber dropouts with aluminum inserts
- Flat mount 160mm disc brake with internal cable routing
- 450g
$999.00
Diamond For The Rough.
In a time where standards are being reinvented every day, it's important to look through the clutter to find clarity. Find out what's actually here to stay and make an impact. We start with a simple question: What's going to improve the product and rider?
The new Diamond has a host of features to cater to the aggressive rider who demands more. We gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing that amplifies steering precision and control in the moments of "ultimate shred". We also increased the tire clearance, allowing you to utilize a bigger tire and still have clearance for mud.
Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic which means the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really get the best of both worlds.
Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market.
- D1 Damper
- Compression Bladder
- OTT Off the Top Adjuster
- Shim Stack Controlled Damping
$1,199.00
Experience incredible steering precision, small bump sensitivity, and absolute control with the new Onyx 38. A unique E-Designed chassis, wider-than-ever stance, and burly 38mm stanchions launch the Onyx into a new era of MTB Suspension.
All new demands require all new thinking. The Onyx D1 38 sets a new standard in E-Designed suspension. What does it mean to be specifically E-Designed? For years, the market has taken “acoustic” suspension and made after-thought upgrades in order to make it “E-Bike Approved”. Bumping up compression damping, using a slightly thicker crown, or just saying “Add 10 PSI” isn’t doing it right. E-Specific design means we thought about these needs from day one. How can we make a fork flex equally as one unit? How can we achieve unreal steering precision without the harshness or deflection? How can we control the fore and aft flex issues the added weight of an e-bike puts on a fork? Questions like these were the foundation, the bones of this concept. After years of engineering, different thinking, and countless hours testing, we nailed it. The final result wasn’t only a fork that met all the requirements and needs of a modern, aggressive E-bike, but it directly translated to a regular bike.
NOT ONLY IS THIS THE PINNACLE OF E-BIKE SUSPENSION, IT’S THE NEW STANDARD FOR SUSPENSION.
- Burly fork designed for the rigors of E-Bike use, providing steering precision without harshness or deflection
- OTT (Off The Top) is an adjustable coil negative spring that allows the rider to dial in initial compliance without affecting the mid and end stroke
- The D1 damper features updated high-flow compression and rebound porting to allow a linear suspension dynamic. This initial damping support without any high-speed harshness paired with a 30% increased volume in the Compression Bladder System results in increased small bump sensitivity and damping consistency
- High flow linear rebound update increases response without a loss of control or damping
- A purpose-built crown increases drop for extra down tube clearance and features a dual hollow bore design with strategically varied wall-thickness for improved stiffness and strength
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires.
- Material: Carbon Fiber
- Steerer Tube Length: 350mm
- Rake: 43, 50mm
- Axle to Crown: 370mm
- Brake: Disc
- Axle Compatibility: 12mm
- Max Rotor Size: 160mm
- Max Tire Clearance: 32mm
- Crown Race Diameter: 1.25
- Torque Spec: Steer Tube: 5Nm
- Torque Spec: Axle: 8Nm
- Weight: 425g
$625.00
A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig.
- Material: Carbon
- Weight: 748g
- Steer Tube length: 350mm
- Rake: 42mm, 51mm (adjustable)
- Axle To Crown: 488.8mm
- Max Rotor Size: 160mm - 203mm
- Max Tire Clearance: 5.2-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec – Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$650.00
Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers.
BOOST (15X110MM)
- Material: Carbon
- Accessory Mounts: Yes
- Weight: 719g with Fender, 676g (w/ clasps)
- Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks)
- Steerer Tube Length: 300mm
- Rake: Adjustable – 44mm, 52mm
- Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position
- Brake: Disc
- Brake Mount: Post Mount
- Axle Compatibility: 15 x 110mm
- Max Rotor Size: 180mm
- Max Tire Clearance: 29 x 3.0” with Fender
- Crown Race Diameter: 1.5”
- Torque Spec: Steerer Tube: 5.5 Nm
- Torque Spec: Axle: 8 Nm
$650.00
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application.
- Material: Carbon Fiber
- Steerer Tube Length: 300mm
- Rake: 44, 52 Adjustable
- Axle to Crown: 470mm
- Brake: Disc
- Max Rotor Size: 180mm
- Max Tire Clearance: 3.4-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec: Steer Tube: 5.5 Nm
- Torque Spec: Axle: 8Nm
- Weight: 711g (w/ fender), 686g (w/ clasps)
$27.00 - $29.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$949.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions.
- GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
$1,149.00
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Now available with the gravity-focused GRIP X2 damper.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
CHASSIS Standard
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE. 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 1929g (36, 29, F-S, 160, Grip X, Kabolt X)
$1,249.00
E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper with Variable Valve Control
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design
- Lower leg bleeders
- Direct mud guard mount
Page 1 of 5
Next page