Other
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
- Note: This axle is not compatible with Evil Bikes
- This axle is very common with a lot of bike brands, please visit burgtec.co.uk for complete fitment info.
- Thread M12 x 1.75mm pitch
An effortlessly subtle and minimal design that keeps your seat post secure and adds the last splash of colour to your build. No edge left unsmoothed, and no detail overlooked.
Even the split in the back has been machined wide enough so there’s no need to detach your dropper cable, which makes installation a breeze.
A stainless-steel bolt gives reliable clamping power and ensures no rust even in the grimmest conditions.
- Stainless Steel Hardware
- 6061-T6 Aluminium
- Weight: 22g
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
When you’ve got to finish your bike off right.
The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit.
Mix and Match to suit your bike.
***Top Cap only works with Burgtec Top Cap Bolt***
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.70
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.32 - $1.98
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.65
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.82 - $2.42
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$2.00
Volume Spacer tuning kits for FOX suspension fork service and repairs.
$2.00
FSA Mega Exo Small Parts.
$2.50
Volume Spacer tuning kits for FOX suspension fork service and repairs.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
$2.99
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$2.99
Cable exit guide specific to Slash+ for routing hydraulic brake & rear derailleur.
Get your cables under control.
Product details
First used on Slash+
Leave removable tab in place for AXS shifting
Hardware not included
Refer to the Service Manual for assembly & service instructions
For OE replacement purposes only - not intended for aftermarket installation
$2.99
Securely attaches Slash+ speed sensor to the chainstay.
Trek proprietary cable management system.
Product details
Designed for Slash+
Fasten with M4x0.7x6mm button head screw
6.3mm inner diameter clamping area
Refer to the Service Manual for assembly & service instructions
For OE replacement purposes only - not intended for aftermarket installation
$2.99
Keep your elbow pads in place.
- Necessary for proper assembly
- M4 x 10mm
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.03
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.30
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Driver Spring - Ratchet EXP
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
Page 1 of 32
Next page