Other
Mount your SRAM Pod Controller directly to your brake levers for a perfect ergonomic position and a clean look on your cockpit.
The Poddy can be fitted to any brake lever that features a SRAM Matchmaker (MMX) interface, which is offered as an adapter by most brake manufacturers: Bikeyoke/Shimano, Trickstuff, Hope, Magura, Formula, to name but a few.
---2023-487086-3396861-1.png)
This BikeYoke allows the use of a standard shock in your Specialized bike.
Epic 2018-2020
Includes:
- 1x BikeYoke EP02
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
Designed to simplify thousands of hangers into one universal design that can be easily stocked by your local bike shop. Our hanger is uniquely forged and fully machined from aluminium giving you the toughest hanger possible. We always recommend having a spare to be sure of no missed rides.
- Compatible with all frames designed to accept the SRAM UDH
- Compatible with all MTB and E-MTB drivetrains
- Forged and Fully Machined from 7075 Aluminium
- Supplied with Mounting Screw and Washer
- Thru Axle Pitch M12 x 1.0
Manufacturer’s part number: AC-DRHG-MTB-A7
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side.
- Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits Yeti Bikes:
- 160E
- Arc
- SB120
- SB140 MY23+
- SB160
Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.
When you’ve got to finish your bike off right.
The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit.
Mix and Match to suit your bike.
***Top Cap only works with Burgtec Top Cap Bolt***
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.70
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.32 - $1.98
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.65
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.82 - $2.42
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$2.00
Volume Spacer tuning kits for FOX suspension fork service and repairs.
$2.00
FSA Mega Exo Small Parts.
$2.50
Volume Spacer tuning kits for FOX suspension fork service and repairs.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
$2.99
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$2.99
Cable exit guide specific to Slash+ for routing hydraulic brake & rear derailleur.
Get your cables under control.
Product details
First used on Slash+
Leave removable tab in place for AXS shifting
Hardware not included
Refer to the Service Manual for assembly & service instructions
For OE replacement purposes only - not intended for aftermarket installation
$2.99
Securely attaches Slash+ speed sensor to the chainstay.
Trek proprietary cable management system.
Product details
Designed for Slash+
Fasten with M4x0.7x6mm button head screw
6.3mm inner diameter clamping area
Refer to the Service Manual for assembly & service instructions
For OE replacement purposes only - not intended for aftermarket installation
$2.99
Keep your elbow pads in place.
- Necessary for proper assembly
- M4 x 10mm
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each
$3.03
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$3.30
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Driver Spring - Ratchet EXP
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
Page 1 of 32
Next page