Lubes/Cleaners

Premium All Purpose Bicycle Grease - Ultra smooth premium grease. - Low friction, long service life, superior corrosion protection, and anti-wear protection. - Excellent for most bicycle applications including bearings. A premium, all-purpose, NLGI #2, extreme pressure, lithium complex bicycle grease. Pedro's Grease is excellent for bearing applications, assembly tasks, threads, and component interfaces. Formulated to have an excellent dropping point, superior water resistance, and outstanding structural stability over a wide range of temperatures, Pedro's Grease is the grease of choice for those that demand the best.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Finish Line's Citrus Degreaser was cycling's original orange peel-based degreaser and it has set the standard in bike parts cleaning since 1988. Super strong and fast-working to cut through grime and crud, it's formulated with powerful and natural citrus extracts. With Citrus your drivetrain will clean up faster and with less scrubbing whether it's covered with grease, oil or wax. Plus, you can simply rinse with water for a residue-free finish.

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.

- Highly efficient carbon fiber assembly compound designed to prevent over-tightening and create a secure coupling between surfaces - Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque without causing fatigue or internal fractures or shortening component life

World's first pliable hot melt chain wax formula with Graphene for use in crockpots is here. GRAPHENwax—Super pliable, non-crumble, quiet, clean and extremely easy to break-in formula. It exhibits excellent dirt protecting capabilities and durability while maintaining impressively low friction for a prolonged period of time in dry and mixed conditions. It's the easiest wax to break-in after chain cools down—simply hold your chain in one hand and run it between two fingers of your free hand (as per our video) and job done—no more solid sticks or backpedaling issues. Our wax doesn't crumble, chip or leave any marks thanks to our proprietary formula. It's everything you wished for in a hot melt wax. Perfect for Road, Triathlon, Gravel, Mtb and E-bike. Keeps your drivetrain spotless clean. Can be used along with GRAPHENlube. It's the most quiet hot melt wax you will ever use. Unlike other Hot Melt waxes, GRAPHENwax not only exhibits lowest friction, but also lasts longer and is much easier to use. Usually after dipping the chain in melted wax you need to wait until chain cools down and then painstakingly break every chain link so the chain can be flexible again, leaving crumbled mess behind and particles on the frame and crank. With GRAPHENwax, we have reinvented this process. After the chain cools down, you only need to run it between your fingers along its entire length, and the chain is broken-in leaving no pieces of wax behind. Our wax simply doesn't crumble during the chain movement, meaning you have more wax that protects the drivetrain for longer. It can also withstand those hot days where other wax lubricants simply melt off your chain. GRAPHENwax will not stain your fingers when handling the chain and it's the quietest wax coating you will use. It's your "dream come true" wax lubricant. GRAPHENwax and our World Tour winning GRAPHENlube go very well together. If you plan longer rides you can "top it up" with GRAPHENlube. Chain will not require re-cleaning. Why we don't use Tungsten Disulfide (WS2) nor Molybdenum Disulfide (MoS2) additives. While these substances can exhibit super-low friction, they do it only in vacuum or inert gas. In normal humid air they not only have high friction but also very short life because of the rapid oxidation process. Using these additives in chain lubricant, where water is often present, is simply pointless. We also don't use any oils or paraffin oils in the mixture because it adversely impacts the friction. - 340g / 12 oz . +/- 4%. Each box contains 4 "squares" - Wax is black, but on the chain looks transparent. Doesn't leave marks. - Hydrocarbon waxes containing special mix of high-purity graphene. It does not contain any harmful solvents.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals

Silicon Shine not only leaves your bike looking factory fresh, but it also acts as an amazing friction reducer for suspension parts and reduces dirt adhesion. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth, World Cup performance. - Protects and leaves a sparkling shine on metal, plastic & rubber parts - Reduces friction on fork stanchions and rear shocks - Silicon formula prevents grime build up on treated surfaces - Cuts down on future cleaning and maintenance

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

Green Fizz's biodegradable solvent-free formula can be safely used on all parts and materials, including carbon fiber, without washing away grease and lubricants or damaging delicate parts. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC - Can be used with or without water

Recommended by DT Swiss for lubrication of Ratchet mechanisms found in DT's Ratchet, Ratchet EXP and Ratchet LN hubs

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

- Biodegradable, non-toxic all-purpose cleaner - Fast-Acting cleaning agents lift away dirt while scrubbing grime and oil deposits - Specially engineered surfactants lower surface tension allowing better penetration and wetting of soils - Tough on dirt, yet gentle enough to use on delicate surfaces including paint, plastic, chrome, anodized finishes, rubber, carbon fiber, aluminum and magnesium - User friendly formula cleanly washes from the surface - Contains no harmful acids, CFC's or solvents.

Ritchey's Liquid Torque creates extra friction between 2 surfaces, reducing tightening torque required to avoid slippage. - Creates extra friction between two surfaces, allowing tightening torque to be reduced by up to 30% - Particularly useful when over-clamping can damage sensitive components such as carbon bars or steerer tubes - Approved for use with carbon, steel, alloy and titanium surfaces - Use with Ritchey Torqkey to ensure safe installation of Ritchey bars and stems

This classic pink Bike Cleaner has incredible cleaning power because it contains Nano Technology that breaks down dirt and grime on microscopic levels, while also caring for your bike's delicate finish. Muc-off's pink cleaner is biodegradable, free from acids, CFC's and solvents, and it's alkaline based so you can clean away with a guilt-free conscience. It's safe on all surfaces, and it's even disc brake rotor and pad friendly. - Safe on all parts and surfaces including carbon fiber - Will not harm seals, cables, brake pads or rotors - Effective road bike & mountain bike cleaner - Safe on anodized metal - Alkaline based and free from CFCs, solvents or acids - Nano Tech Formula cleans on a molecular level - Biodegradable - Dispenser tap available separately, LU1700

Muc-Off's eBike All-Weather Chain Lube is a high-performance synthetic chain lube specifically designed for the hi-torque loads applied to an eBike chain. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion and metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the most powerful e-bike drivetrains. - Specifically formulated for eBike chains - For long-distance all-weather on/off-road riding

- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle

Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

- Improves braking performance - Treats pads and rotors to reduce brake squeal - Prolongs disc pad and rotor life - Rapidly removes brake dust, oil, grease, brake fluid and grime - Re-hydrating formula that's acetone free to preserve braking components - Safe to use on both bicycles and motorcycles

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

Citrus Cleaner/Degreaser provides a powerful foaming action that cuts through and cleans the toughest grease, dirt and oil. - Easy to use trigger allows user to lay down a layer of foam that will cling and penetrate into the part to provide superior cleaning performance - Quick evaporation technology leaves no residue and needs no rinsing - Biodegradable formula

Recommended by RockShox for shock rebuilds. • Rear shock seals lubricant • 2g tube

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

WPL Dry Chain Lube is a premium bio-based chain lube formulated for dry and dusty riding conditions. The endurance formulate has been designed to penetrate deep into chain links to maximize pedal efficiency and facilitate gear-shifting. The biodegradable, non-toxic, and PTFE-free formula keeps the mechanic and the environment safe from harm. Class-leading surface-binding compounds create a thin film around moving chain links to create unparalleled performance for riders of all disciplines. - Premium bio-based formula made with natural ingredients - Emulsifite technology provides dynamic cleaning abilities and prevents black goop build-up - Long-lasting formula improves pedal efficiency by reducing chain wear and friction - For use on bicycle chains, shifters, derailleurs and cables - Biodegradable, non-toxic, PTFE-free formula is environmentally friendly

E-Bike Chain Wax uses the same proven and trusted, biodegradable wax/water emulsion technology as normal Squirt Chain Lube and is fortified with specialized high-pressure friction modifiers. - Slightly more slick than the original chain lube as this enables E-Bike Chain Wax to handle higher torque pressure and last longer in wet riding conditions than other wax based lubricants - Does not attract dirt or grime to your chain and no degreasing is required or recommended - 100% biodegradable