Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

These reducers allow the use of handlebars with 31.8mm clamp diameter in our Barkeeper stem (which is normally designed for 35mm handlebars). - 19g /pair - Barkeeper stem purchased seperately ATTENTION: The sleeves were specifically designed for the BikeYoke Barkeeper stem. Other stems were not checked for compatibilty.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - Please visit https://burgtec.co.uk/product/trek-184-5mm-rear-axle/ for complete fitment info. - Thread M12 x 1.75mm pitch
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
When you’ve got to finish your bike off right. The Burgtec Top Cap, Top Cap Bolt and Stem Spacers are the perfect finishing kit. Mix and Match to suit your bike. ***Top Cap only works with Burgtec Top Cap Bolt***
Designed for BB86/BB92 frames (with 41mm ID press-fit BB shell) - Compatible with SRAM DUB cranksets (28.99mm spindle) - Stainless steel double row bearings: 440C Stainless steel balls and races Vendor Part # BKS-7016
The elegant design of the Orbit Seatclamp is further enhanced by elaborate engravings and fits perfectly into the OAK product range. The enlarged clamping surface of the Orbit Seatclamp ensures that your Dopperpost is held securely and is particularly gentle on bearings and bushings. Includes: - Orbit Seatclamp - Seat clamp screw in black - Washer - Stickers (5 pieces)
CNC machined 6061 aluminum Black anodized finish Thru Axle M3x10mm Flat Head Screw Giant: 176M22G9917A1K Does not include axle nut. Giant Revolt Advanced 3 - 2022
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.70
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
- Aheadset preload adjusting bolt
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$0.99
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Service parts for Fox suspension.
$1.20 - $1.98
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
KS Dropper Post Service Parts
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.79
- Model: Replacement bolt - Compatibility: Allen, M5x16
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
$2.39
- Crown Race - Size: 27.0mm
$2.39
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.39
- Type: Lock washer - Size: 1" Keyed
$2.39
- w/Nut - 1-3/4-inch
Page 1 of 61 Next page